A wallpaper calculator removes guesswork.
Unlike a paint calculator or drywall calculator, this estimator converts your project into rolls through roll coverage and wallpaper specs. Enter the pattern repeat, tap once, and the number of rolls appears, quick and easy.
Typical rolls yield 45–50 sq ft usable, so deduct doors, windows, and custom wall openings from the perimeter total. Unfinished walls or taller ceiling height shift the approximate recommendation. Colors don’t matter; murals need support.
How to Use the Wallpaper
- Pick your units. Keep US for feet and inches, or switch to Metric for meters and centimeters. The default values change with it.
- Enter your measurements. Fill in the total wall width, wall height, doors and windows area, roll width, roll length and pattern repeat.
- Read the result. The big number is your main answer. Below it you also see area covered. Open Show the formula to see every step with your numbers, or use Copy results to paste them into a message or shopping note.
Room
Record feet and inches for a rectangular room, or centimeters if metric suits you; the list of walls grows as needed.
Choose imperial if your tape measure shows inches; otherwise cm works identically. Enter wall height and total wall width, then add wall or remove wall until the room perimeter matches reality, covering 4 walls easily.
A single wall needs only width and height, while other shapes demand sketching first. Ceiling height beyond eight feet adds strips, and the pattern repeat quietly adds more length to every single strip you cut.
Doors and Windows
Measure each first, because different size windows sharing a wall alter the total area more than most buyers expect.
To subtract or deduct openings properly, record the size of each frame, then multiply. The number of doors and number of windows matter less than their measurements, since one patio slider outweighs three small panes.
Skip tiny cutouts, but if an opening covers a large part of the wall, count it. The wall width shrinks fast around French doors, and the calculator’s output reflects every single inch you honestly enter.
Wallpaper Specifications
Start with wallpaper type: traditional, pre-pasted, or peel and stick. Each behaves differently on the wall, and packaging tells you the roll size, roll width, and roll length before you commit to cost per roll.
The preset offers 24 in × 30 ft, 27 in × 18 ft, and 27 in × 30 ft rolls across the US. Items sold by the yard or packed as double rolls need care.
With no pattern, enter 0 for pattern repeat; otherwise record the vertical repeat in inches or cm. Treat anything priced per single roll carefully, and use the separate yards estimator for goods sold by length.
Pattern Repeat
Here’s the contrarian truth: waste rarely comes from clumsy cutting; it comes from the pattern repeat. Every larger repeat forces cut strips to start lower, so a big motif eats paper faster than people suspect.
The vertical repeat is the distance between neighboring repeating elements, measured in inches. Designers align adjacent drops by it, so the strip height you need always exceeds plain wall height by up to that amount.
Treat the field as a required input and never leave it blank. With no pattern, enter 0; with anything else, trust the printed figure and match it to the repeat shown on the manufacturer’s label.
Accuracy and Ordering Extra
Order 10% extra for straightforward rooms and 20% extra for complex rooms or complex room shapes or tricky fittings. Trimming at ceilings, corners and repeats all consume paper that no estimate can ever see perfectly.
Buy an extra roll for mistakes, and keep unopened rolls so returns stay possible within 30 days, if the supplier allows. Matching color across lots is the real risk; delivery batches sometimes differ visibly, too.
A professional installer, wallcovering installer or decorator will often give more precise figures than any tool, because they see your walls firsthand. Treat our approximate recommendation as a starting point, and discuss ordering with them.
Pattern Match Types
A straight match lines motifs across at the same height, while a half drop match shifts each neighbor halfway down. It is usually better to use straight for small rooms because pattern repeat waste stays far more predictable.
A quarter drop match or third drop match moves each drop by a smaller fraction, which suits large florals. These complicate pattern match planning, because every added drop type alters how much paper typically disappears.
With a random match, panels can hang in any order, and no pattern match is required for textured grasscloth. Reverse hang alternative lengths save paper on some designs; check labels first, then ask suppliers directly.
Planning a bigger job? Browse all our paint, drywall & trim calculators to work out every material you need.
Frequently Asked Questions
What Is the Wallpaper Pattern Repeat?
Every wallpaper project quietly hides some waste in strips trimmed to match. The pattern repeat is the exact vertical distance between neighboring repeating elements, and repeat height decides whether adjacent patterns line up across seams.
How Do I Adjust the Number of Rolls for Pattern Repeat?
Multiply roll width by roll length for roll area, divide net area by it, ceil: rounds up division to number of rolls. Pattern repeat lifts room height by pattern height: effective height, not true height.
How Do I Calculate the Wallpaper Needed for a Room?
Measure width, length, and height first. For a rectangular room, gross wall area equals 2 × (width + length) × height. Subtract doors and windows, divide by roll area, then round up to whole rolls.