Skip to content

Siding Calculator

Calculate the squares of vinyl siding or the lap boards you need for your house.

Siding type
Units
ft
ft
ft
ft
ft²
%
0

    Show the formula
    
      

    The exposed wall body, triangular gables, and expected breakage all reshape the final order area before anything ships.

    Switch to a wall-by-wall takeoff with detailed wall sections once rectangular walls, openings, and the top row need separate attention.

    Results arrive as squares, cartons, pieces, or plank counts. One siding square equals 100 sq ft of installed coverage, while product coverage on vinyl packages or lap boards decides how many packages leave the yard.

    A nominal board of 8 inch nominal width on HardiePlank gives roughly 6.875 inch exposure, so 11 boards climb about 75 inches. Exposure, not width, drives boards per square and even coursing across field siding.

    Material cost is only part: trim, corners, starter, fasteners, accessories, housewrap, and flashing add up. Real cost estimates also weigh removal, wall condition, and coastal exposure, where HardieZone HZ5 or HZ10 product selection really matters.

    How to Use the Siding Calculator

    1. Choose what you want to work out. Under Siding type, pick Vinyl (squares) or Lap or fiber cement boards. The boxes below change to match.
    2. Pick your units. Keep US for feet and inches, or switch to Metric for meters and centimeters. The default values change with it.
    3. Choose the board length. Options: 12 ft or 16 ft.
    4. Enter your measurements. Fill in the house perimeter, wall height, gables, gable width, gable height, doors and windows area and board exposure. You only see the boxes that apply to the option you picked.
    5. Set the waste. It starts at 10%. Raise it for awkward shapes or rough ground, lower it for simple jobs.
    6. Read the result. The big number is your main answer. Below it you also see area with waste, wall area, gables and boxes (2 squares each). Open Show the formula to see every step with your numbers, or use Copy results to paste them into a message or shopping note.

    Siding Formulas (Area, Squares, Packages)

    Every formula chain ends at one figure: order area. Reach it by taking net siding area and multiplying by a coverage target, such as 1.10 for 10% simple jobs or 1.20 when 20% gables dominate.

    Rectangular wall area is wall length times wall height for each wall face. Gable area uses gable base times gable height ÷ 2. Treat split levels and changing wall heights as separate rows, not averaging.

    Openings are easy: each window, door, and garage opening is width × height. Subtract those opening deductions from gross siding area to reach net area, then apply your waste %, perhaps 15% moderate, before ordering.

    Converting sq ft to linear ft means dividing adjusted area by exposure inches ÷ 12. Installed coverage per piece equals face length times exposure, and packages come from ceil of order area over package coverage.

    Siding squares are order area ÷ 100. Cartons follow coverage per carton, always rounded up.

    How Much Siding Do I Need?

    Interior square footage misleads people. A 1,500 sq ft house with 8′ walls might carry far more exterior surface than expected, because siding follows combined exterior wall length and exposed wall height, not floor plans.

    On a simple house, measure rectangular walls first, add triangular gables, and enter known-area sections for porches or bump-outs. That total becomes gross siding area before you deduct openings you truly won't cover with cladding.

    Order by net area, then add 10–15% waste for offcuts. Every single window interrupts courses, leaving a cutoff that rarely fits elsewhere, so boards disappear faster than gross wall area suggests on paper alone.

    For a rough HardiePlank gut check, figure 175–200 linear feet of plank for every hundred square feet of wall side. That range shifts with coursing, wall height, and how many courses stop at window trim.

    Keep field siding separate from trim lines, and write down intended exclusions like masonry wainscot or a screened porch. Your final net area then reflects what installers will actually clad, not hopeful guesses from memory.

    Worked Example

    Take a 1,500 sq ft ranch measured as perimeter × 8′, giving 1,650 sq ft wall area. Subtract 320 sq ft openings across 8 windows plus entry doors, leaving net 1,330 sq ft of siding.

    Add 12% waste and the order reaches 1,490 sq ft. Divide by 6.75/12 for exposure and you need 2,649 linear ft, which converts to 221 boards of 12-foot HardiePlank before any trim enters the picture.

    Finish the carton column: 2,000 becomes 2,200, 22 squares, 11 cartons. Another house shows 1,440 sq ft of walls including 180 sq ft gables, minus 177 sq ft openings, leaving 1,263 sq ft: 12.63 squares.

    That needs 186 planks, 19 pcs of 5.5 inch HardieTrim, and 28 lbs siding nails. Pricing shows $2,325 siding, ColorPlus $837, trim $674, accessories $280, materials $4,116, then labor $5.5/sq ft adds $6,946.50, total $11,063.

    Windows & Doors: Should You Deduct Them?

    Contrarian take: skipping deductions often saves whole jobs. Small openings like bath windows barely change gross siding area, because boards run past them and the leftover becomes offcuts you can't reuse elsewhere on the wall.

    Big openings tell another story. Garage doors, patio doors, and window walls remove serious surface, and ignoring them means you over-order. Take exact measurements there and subtract the measured opening area from the gross wall.

    There's no universal rule, so split the difference. Tiny bathroom windows get no deduction, acting as a built-in cutting allowance, while large doors come off. Quick-count areas follow the same logic with rough measurements.

    Remember that courses interrupted by openings still need full boards above and below. The net siding figure shrinks, yet cut count rises, so waste percentage should climb slightly higher whenever a wall carries several openings.

    Whatever you remove from siding, add back somewhere else. J-channel, casing, flashing, mounting blocks, and trim belong on separate quantity lines, sized from each opening's perimeter rather than buried inside a generic waste percentage figure.

    Waste Factor

    Waste isn't sloppiness; it's project geometry. Every angled cut at a gable peak, every set of end cuts at corners and rakes, and every bit of pattern alignment quietly consumes material before installation errors begin.

    Some cut-up exterior jobs with intricate cuts honestly reach 20%+ on tough houses.

    A simple rectangular box with 4 walls, few windows, and long runs can sit at 5–10% for an experienced installer. A typical house lands near 10–12%, which explains why calculators carry a default 10% setting.

    Add a +3–5% DIY allowance for any first-time DIY crew. The learning curve shows up as damage, miscut angles, and wasted short runs. Experience and product brittleness shape that number more than layout complexity alone.

    When many gables appear, set a custom percentage around 15% and check supplier guidance. Keep a few repair pieces from the same color production lot, because matching later is nearly impossible once batches change.

    Siding Coverage: Squares, Cartons, Pieces & Exposure

    Exposure is the reveal visible after the board above laps down. An 8.25 inch HardiePlank with 1.25 inch overlap leaves a 7 inch exposure, and that visible course height, not nominal height, sets installed coverage.

    LP SmartSide 8 inch uses a 1.0 inch min overlap, landing near 7.00 inch max. A 6 inch wood bevel usually caps at 5.00 inch max. Exceed the manufacturer maximum and the warranty disappears quickly.

    At 7.5 inch exposure, a plank in 12′ length covers 7.5 sq ft per plank, so 1 square consumes 13–15 planks per 100 sq ft depending on cuts. Board width matters less than people expect.

    Horizontal vinyl behaves differently: coverage per piece is panel length times exposed height, and pieces per carton multiply into square feet per carton. Always read the package label or data sheet instead of trusting memory.

    A siding square equals 100 sq ft, yet cartons list squares per carton that vary by brand. Manufacturer coverage and supplier coverage sometimes disagree, and whole purchasable units create package overage above your material quantity.

    Trim, Accessories & What Calculators Often Miss

    Calculators love field siding, forgetting the frame around it. Starter strip runs the bottom perimeter, the base of every wall, sized from total perimeter in linear feet, because the first course depends on it entirely.

    Plan 2 boards per outside corner and 1 board per inside corner, each running full height from foundation top to soffit, extending 2–3 inches below sheathing. Figure corner count × wall height, plus 10% extra.

    HardieTrim pricing in many online calculators runs 3.5 inch $1.50/ft, 4.5 inch $1.85, 5.5 inch $2.25, 7.25 inch $2.95, 9.25 inch $3.75, and 11.25 inch $4.50. Vinyl jobs swap corner boards for pre-formed corner posts.

    Manufacturer-matched J-channel per window equals (2 × width + 2 × height) × 1.10, heads at window width + 2 inches. Roof rakes add rake lengths; the top course takes utility trim or undersill trim.

    IRC R703.4 requires flashed wall penetrations plus diverter flashing at roofline intersections. Use corrosion-resistant nails, galvanized or stainless. Seal fiber cement vertical butt joints at 1 tube per 25 linear ft, but vinyl no caulk.

    Siding Material Types & Product Comparison

    Compare board width: fiber cement at 8.25 inch, LP SmartSide engineered wood at 8 inch / 12 inch, wood bevel at 6 / 8 / 10 inch. Each sets its min overlap and max exposure.

    HardiePlank needs 1-1/4 inch lap for 7 inch reveals. LP needs 1 inch, giving 7 / 10.5 inch. Bevel runs 5 / 7 / 9 inch; vinyl double 4 inch shows 4 inch per row.

    Weight per square affects crew labor: roughly ~325 lbs for fiber cement, ~225 lbs for engineered wood, ~180–260 lbs for bevel, and ~60 lbs or ~65 lbs for vinyl and Dutch lap 5 inch profiles.

    HardiePlank lap covers 7.5 sq ft per plank for most homes wanting a traditional look at $12–17 per plank. HardieShingle gives 2.3 sq ft per panel on gables and accent areas, ideal for cottage style.

    HardiePanel delivers 40 sq ft per panel for modern, vertical, or commercial walls at $42–60 per panel. HardieTrim ships 12 ft per piece for windows, corners, and fascia. Remember, wrong exposure voids warranty coverage fast.

    Climate & Regional Considerations

    Material selection by climate matters far more than color choice. HardieZone splits products for cold, freeze-thaw regions versus humid, coastal, or subtropical climate zones, where salt air and saltwater spray punish weaker cladding over decades.

    In high humidity, unprimed wood suffers moisture absorption and humidity expansion. Wood bevel and engineered wood need primed cuts sealed immediately after cutting, while moisture-resistant formulations protect fiber cement integrity along the coast for years.

    Extreme cold makes vinyl brittle, and hot summer sun brings vinyl fade.

    In fire-risk zones, the wildland urban interface changes everything. WUI ordinances often require ember-resistant, non-combustible cladding, and HardiePlank passes ASTM E136 testing, unlike combustible vinyl or untreated wood, which can feed flames near burning brush.

    High-wind coastlines generally favor heavier, denser, pest-proof boards with tested fastening schedules. Some products are marketed as ICC 7A compliant for California WUI builds, but always confirm local listings rather than trusting glossy brochures blindly.

    Installation Notes & Common Mistakes

    The first is wrong nails: bright nails rust, leaving stains within 5 years. Always use corrosion-resistant fasteners, hot-dip galvanized or stainless steel.

    Vinyl must be hung loose because panels expand and contract with temperature. Driving nails snug instead of centered in slots causes pinned movement, buckling, and wavy walls. ASTM D4756 and IRC R703.11 describe proper attachment.

    Caulking vinyl joints traps movement and invites summer buckling; leave no caulk panel ends. Fiber cement differs completely: butt joint caulk with elastomeric sealant, or joint flashing, prevents water infiltration and eventual sheathing rot underneath.

    Field cuts on engineered wood need primer; unprimed cut ends absorb water, swell, and risk delamination. LP SmartSide and James Hardie both list grade clearance around a 6 inch minimum to stop upward moisture wicking.

    Overstretching maximum exposure on 7 inch HardiePlank gets the warranty voided fast. Plan even coursing from the start, otherwise a skinny sliver course ends up at the top, right under the soffit where everyone notices.

    Understanding Hardie Fiber Cement Siding

    James Hardie built its reputation slowly, and the company now calls itself the #1 brand of fiber cement siding in America, claiming installations on more than 8 million homes across wildly different climates and regions.

    The HardieZone system engineers separate formulations, so a Minnesota farmhouse and a Gulf Coast cottage don't receive identical boards from the plant.

    Boards made for humid and coastal conditions resist swelling from constant moisture, while cold-climate versions focus on freeze-thaw durability. Ordering the wrong zone product won't fail immediately, but long-term performance suffers noticeably over several seasons.

    Fiber cement itself blends Portland cement, sand, and cellulose fibers, pressed and cured into dimensionally stable boards. That composition explains the weight, the heavy dust when cutting, and the need for proper silica respiratory protection.

    Because the material is rigid, layout precision matters more than with vinyl. Cuts are permanent, gaps must be planned, and the calculator's waste percentage should reflect a material that doesn't forgive careless handling or rushing.

    Turn the Calculator Result into a Real Siding Decision

    A calculator output is a planning number, nothing more than that. It tells you roughly how much material the walls need, but it cannot see what sits underneath the old cladding or behind window casings.

    Before accepting any quote, ask how the contractor will verify wall condition after removal. Hidden structural repairs routinely add days and dollars, and honest bids include allowances for sheathing replacement rather than surprises halfway through.

    Flashing and trim often cost more than people expect. A thorough bid lists window heads, kickout diverters, corner boards, and starter details separately, so you can compare apples to apples between competing local contractors fairly.

    Coastal exposure shifts the decision considerably too. Hardie products built for salt and humidity often outlast vinyl in harsh conditions, although vinyl's lower price still makes sense for budget-driven rental properties and modest starter homes.

    Think of siding as one piece of an exterior system that includes housewrap, sealants, ventilation, and drainage. Treat the calculator result as the starting conversation with installers, not the final word on budget or materials.

    Hidden Wall Condition

    Peeling back old siding is where estimates meet reality.

    Torn or missing house wrap shows up constantly on older homes. Sometimes there's only felt paper, sometimes nothing, and replacing it adds material and labor that no square-foot calculator ever anticipates during early planning stages.

    Original flashing around windows and doors frequently fails before the siding does. Rusted drip edges, reverse-lapped paper, and missing head flashing all funnel water directly into framing cavities below, rotting plates and sill boards quietly.

    Moisture damage spreads quietly behind cladding. Stained studs, mold, and rotted rim joists can turn a straightforward reside into a structural repair project requiring additional permits and inspections, adding weeks before new siding goes up.

    A real quote includes a per-sheet repair price for sheathing found after tear-off. Compare that line across bids, because your calculator result simply cannot predict what's hiding underneath until the first wall comes off completely.

    Hardie vs Vinyl

    Vinyl wins on upfront price almost every time, often costing half of fiber cement installed. For short-term owners or rentals, that savings can genuinely outweigh durability differences, especially when resale timelines run under ten years.

    Near the ocean, salt air and constant moisture favor fiber cement. Vinyl survives coastal conditions reasonably, but fading and chalking accelerate under relentless sun reflecting off sand and water, so coastal vinyl ages noticeably faster.

    Intense heat can warp vinyl, especially near reflective windows or dark grills. Fiber cement stays dimensionally stable, which matters on south-facing walls that bake every afternoon throughout long summers without distortion, sagging, or visible waviness.

    Fire resistance separates them sharply. Fiber cement won't ignite, while vinyl melts and drips. In wildfire-prone areas, insurers and local codes increasingly reward non-combustible cladding choices, and some codes prohibit vinyl on new construction outright.

    Wind exposure and longer ownership both tilt toward Hardie. Heavier boards resist blow-offs, and over twenty-plus years, lower repainting frequency and fewer repairs narrow the initial cost gap considerably for homeowners planning to stay long-term.

    Trim and Finish Choices

    Trim decisions shape the final look more than siding profile does.

    ColorPlus finishes eliminate site painting, but trim must match exactly. Ordering pre-finished trim alongside planks keeps colors perfectly consistent, while site-painted trim invites slight shade differences that become obvious in low afternoon light within months.

    Gable accents using shingle profiles or board-and-batten panels add texture without changing the main wall siding. They also add separate material lines, cutting time, and waste the calculator may underestimate unless you enter them separately.

    Complex openings like arched windows, bay projections, and angled transoms require custom trim fabrication. Each one adds labor hours, so expect pricing to reflect craftsmanship rather than simple linear footage multiplied by a standard rate.

    When comparing bids, check whether trim widths, finish type, and accent areas match exactly. Two quotes can look similar while one quietly specifies cheaper trim or omits gable detailing entirely, which changes the whole look.

    Common Checks

    Before ordering, run a gable check.

    Next comes the coverage check. Use installed exposure and stated package coverage, never nominal width or raw panel size, because laps, overlaps, and interlocking locks hide material that never actually contributes any visible face area.

    The opening check confirms each measured opening area was handled consistently. J-channel, casing, flashing, mounting blocks, and trim should appear on separate quantity lines rather than disappearing into a vague waste allowance that nobody audits.

    A product check catches elevations using different profiles or materials. Shingles on gables and lap on walls each carry distinct coverage, stock length, waste behavior, and package rounding, so calculate each one independently before combining.

    Finally, compare the total wall area against a quick perimeter estimate. If numbers diverge wildly, something was entered twice or skipped, and catching it now beats returning heavy pallets to the supplier much later.

    How Lap Siding Coverage Actually Works

    Most DIY estimates treat lap siding as perfectly flat panels, but each board sits canted, overlapping the one below. That overlap means full board width never shows; only exposure counts toward covering net wall area.

    Start with the wall assembly: studs, structural sheathing, then lapped house wrap meeting IRC R703.1 and R703.2 water-resistive barrier requirements. A starter strip and base drip flashing sit along the entire wall base run first.

    Keep 6 inch clearance above finish grade, then set the first course level. Fiber cement planks are typically blind-nailed through the upper edge, so the next board hides every fastener completely from view and weather.

    Course count comes from wall height divided by max exposure. When division leaves a remainder, you'd get a sliver at the eave; instead, choose a whole number of equal courses using a slightly reduced exposure.

    That approach sometimes costs an extra course, but delivers even courses and straighter reveals. Openings still demand 10–15% waste for cutoff, since coursing around windows creates offcuts no layout ever fully avoids on real houses.

    Even Coursing Formula

    Calculate num_courses using CEILING of wall_height_in divided by max_exposure_in, then derive adjusted_exposure by dividing height by that course count.

    Take a 9′ wall on HardiePlank. That's 108 inches divided by a 7 inch max exposure, producing 15.43. Rounding up gives 16 courses, so each reveal becomes 6.75 inches, just 0.25 inch tighter than maximum.

    Without adjustment, 15 × 7 covers 105 inches, leaving a 3 inch course squeezed under the soffit. That strip looks amateur, splits easily when nailed, and draws the eye straight to the worst-looking spot possible.

    Reduced exposure means slightly more material, so budget minimum waste 10% on plain walls and 15–20% gables where angled cuts multiply. The extra boards cost far less than tearing off a botched, uneven top row.

    Mark adjusted exposure on a story pole before hanging a single board. Transferring those marks to every corner keeps courses aligned around the whole house, even where window heads interrupt the run unexpectedly midway.

    Frequently Asked Questions

    HardiePlank vs LP SmartSide: Which Do You Need?

    Pick by threat, not taste. Fiber cement blends Portland cement, sand and cellulose, testing noncombustible under ASTM E136, which matters in wildfire and WUI zones. Engineered wood stays combustible, though treated with zinc borate.

    Hail flips that logic. SmartSide flexes on impact, surviving 1.75 inch hail in a manufacturer-sponsored test, and 16′ boards mean fewer seams. Hardie counters with a 30-year non-prorated warranty, while LP’s 5/50 warranty turns prorated.

    How Do I Calculate Siding for a Whole House?

    Always work backward from the order area. That number equals net area plus a waste percentage, and net area starts with every rectangular wall measured as length × height, then each triangular gable added separately.

    Simple homes allow one combined exterior wall length times exposed wall height, minus intended deductions.

    How Do I Include A Gable In A Siding Estimate?

    Most gable mistakes come from measuring the sloped rake. Ignore it. The gable base runs as the base across wall top, and the vertical rise climbs plumb from the eave line up to the peak.

    Multiply base × height ÷ 2 for gable area, then log that triangular end as a separate row from the rectangular wall below. Subtract any openings, and apply waste last, since angled cuts burn material.

    Should I Subtract Windows And Doors?

    Subtracting every window often shortchanges you. Small openings produce offcuts too short to reuse, so take no deduction for them. Cuts, flashing and trim around each one consume more siding than the hole saves.

    Large openings deserve subtraction: garage doors, patio doors and window walls remove real measured area. Replace quick-count assumptions with exact measurements there, then weigh elevation complexity, product-specific trim and waste before trusting net siding coverage.

    How Do I Convert Area Into Pieces, Packages, Boxes Or Squares?

    One square covers 100 sq ft, so squares equal area ÷ 100. Beyond that, there’s no universal box coverage; read the carton label for square feet per carton, squares per carton or pieces per carton.

    For lap pieces, multiply face length by exposure. A 12′ plank at 7.5 inch exposure yields 7.5 sq ft, roughly 13–15 planks per 100 sq ft. Divide order area by package coverage, then round up.

    How Much Waste Should I Add?

    Waste follows the house first, product second. Simple walls and simple elevations need 5–10%, but many gables, dormers, angles and short runs demand intricate cuts, pushing toward 15%. Diagonal install or pattern install hits 15–20%.

    Fiber cement like HardiePlank or Nichiha carries an extra 2–5% because brittleness turns scoring into snapping waste; engineered wood and vinyl forgive more. Start from a 10% baseline, then round up to a full board.

    Is Hardie (Or LP SmartSide) Worth It vs Vinyl?

    Vinyl wins on paper: roughly $4–7 installed against $7–12 per sq ft installed for Hardie, sometimes 2–3× cost. Yet the 2025 Cost vs. Value report shows fiber cement returning 113.7% resale, which reframes that math.

    Climate decides the rest. Hardie, noncombustible under ASTM E136, suits wildfire zones, salt air and freeze-thaw, lasting 30–50 years. LP SmartSide weighs 1.3 lb/sq ft versus 2.3–2.5 lb/sq ft, flexes under hail, but stays combustible.

    Does the Calculator Estimate Installation Cost?

    Not directly. Labor, removal, repairs, access, soffit, fascia and fasteners sit outside it.

    It isn’t an installed-cost model; check local cost guides for regional pricing, then book a site visit. A real quote reflects wall condition, moisture barrier details, trim complexity and finish choice, whether Hardie or vinyl.

    What Is The Difference Between Primed And ColorPlus Hardie?

    The real question is who controls the paint. ColorPlus arrives factory-finished, its baked-on paint cured in controlled conditions, so it resists fading and carries finish coverage for 15 years, something field crews rarely fully replicate.

    Primed Hardie ships with a primer coating, requiring on-site painting at roughly $1–3 per sq ft. ColorPlus runs about $4–5 more per plank, but skipping painting labor and gaining a superior finish often justifies it.

    How Long Does Hardie Siding Installation Take?

    Schedule 5–10 days for a 2,000 sq ft home, and that assumes experienced crews.

    Why the longer installation? HardiePlank weighs about 2.3 lbs/sq ft, heavier than vinyl, so long boards need two handlers, and precise fastening patterns take time.

    Does Hardie Siding Need Maintenance?

    Minimal maintenance doesn’t mean none.

    Siding that’s primed and painted on site faces repainting every 15–20 years with good coatings, usually with light scraping first. The upside is permanent: fiber cement won’t rot and doesn’t feed insects, unlike wood alternatives.

    Can Hardie Be Installed Over Existing Siding?

    Technically tempting, practically risky.

    Budget removal $1–2 per sq ft and treat it as insurance. Skipping tear-off saves a few days, but trapped moisture behind old cladding undermines long-term performance, and warranty claims get complicated when instructions weren’t followed.

    Can I Use This As An LP SmartSide Calculator?

    Yes, with two adjustments. LP SmartSide is engineered wood; just enter its standard widths, 6 inch, 8 inch or 12 inch, and the 1 inch minimum overlap; exposure then calculates correctly from actual product dimensions.

    Second, choose a lower waste factor: 10% simple walls, 15% complex. It’s lighter and easier to cut, so the fiber cement waste premium disappears. One gap remains: no fastener output, ring-shank spec or screw schedule.

    What Is Siding Exposure?

    Exposure is the vertical measurement of visible siding between overlapping courses, the weather-facing portion you see. An 8.25 inch HardiePlank gives a 7 inch exposure after its 1.25 inch lap, and that difference drives everything.

    A narrower exposure means more boards per wall and higher cost. Exceeding the manufacturer’s maximum allowable exposure voids warranty coverage, and IRC R703.3.2 sets overlap minimums. A quick wall diagram before ordering prevents expensive guessing.

    What Is Even Coursing And Why Does It Matter?

    Even coursing separates professional installation from passable work. Every row keeps an identical course height from foundation to soffit, so there’s no awkward cut top course sliver wedged under the eaves, catching eyes and water.

    The math is simple: divide wall height in inches by max exposure, apply CEILING to get course count, then divide again for adjusted exposure. Confirm it stays within James Hardie or LP SmartSide installation specs.

    How Much Overlap Does Lap Siding Need?

    Overlap is where installers get tempted to cheat. Under IRC R703.3.2, wood lap siding needs a 1 inch minimum overlap, while HardiePlank specifies 1-1/4 inch lap and LP SmartSide sticks to its own one-inch minimum.

    Every fraction shifts effective exposure, which changes material quantities. Trying to stretch coverage with thinner laps saves maybe one board per wall but sacrifices weather resistance and jeopardizes product warranties, a terrible trade every time.